International Conference on Control, Artificial Intelligence, Robotics & Optimization Prague, Czech Republic, May 20-22, 2017
Int. Conf. on Control, Artificial Intelligence, Robotics & Optimization

ICCAIRO 2017: International Conference on Control, Artificial Intelligence, Robotics and Optimization
Prague, Czech Republic, May 20-22, 2017


is composed by the following Symposia (as of April 20, 2017)

1. International Symposium on Modeling and Reconstruction of High-dimensional Data
Chairman: Prof. Dr. Dariusz Jacek Jakóbczak, (Assist. Prof.)
Department of Electronics and Computer Science, Koszalin University of Technology, Sniadeckich 2, 75-453 Koszalin, Poland. Email:

Aim: Reconstruction and extrapolation of multi-dimensional data represents the subject that arising in many branches of mathematics, artificial intelligence and computer science. Such a modeling connects pure mathematics with applied sciences. Artificial Intelligence similarly is situated on the border between pure mathematics and applied sciences. Our life and work are impossible without controlling, planning, time-tabling, scheduling, decision making, optimization, simulation, data analysis, risk analysis and process modeling.
1. Data interpolation with applications.
2. Data extrapolation in Artificial Intelligence.
3. Reconstruction of information.
4. Data restoration in optimization.
5. Probabilistic interpolation and extrapolation.
6. Modeling of processes.
7. Data simulation in controling.
8. Mathematical modeling.

2.   International Symposium on Fuzzy Computation

 Dr. Ismail Yusuf Panessai, University of Malaya. Department of Artificial Intelligence, Faculty of Computer, Science and Information Technology. 50603 Kuala Lumpur, Malaysia. Email:,

Aim: Fuzzy computation is a field that encompasses the theory and application of fuzzy sets and fuzzy logic to the solution of systems analysis, information processing, and synthesis problems. This special session will bring together leading researchers, practitioners, end-users, engineers and scientists for sharing knowledge and results in theory, methodology and applications of Fuzzy Logic Systems.

Topics: Fuzzy Logic, Fuzzy Systems, Fuzzy Control, Fuzzy Algebra, Fuzzy Differential Equations, Fuzzy Geometry, Fuzzy Engineering, Fuzzy Topology, Fuzzy Graph Theory, Fuzzy Hybrid Systems, Fuzzy Logic for Internet and Computer Science

3.   International Symposium on Knowledge Computing  in Bio-medical Informatics and Healthcare 

Chairman: Prof. Abdel-Badeeh M. Salem, Professor of Computer Science, Head of Medical Informatics and Knowledge Engineering Research Labs, Faculty of Computer and Information sciences, Ain Shams University, Abbasia, Cairo, Egypt, Email:,

Aim: The field of knowledge computing (KC) has become the most challenging area in the last several years. KC deals with the development of intelligent computing and knowledge-based systems in which knowledge and reasoning play pivotal role. KC consists of three main areas, namely: Document Engineering, Knowledge Engineering, and Reasoning Techniques. This symposium /workshop will bring researchers, developers, practitioners, and users to present their latest research, results, and ideas in all areas related to the applications of KC in health informatics. Moreover the symposium will provide a forum for the exchange of ideas between physicians and computer scientists to address the important issues in those areas. Papers related to techniques, methodologies and applications in medical informatics, telemedicine, and eHealth are especially solicited.


Reasoning   Methodologies and Techniques
Automated reasoning, case-based reasoning, commonsense reasoning, fuzzy reasoning, geometric reasoning, non-monotonic reasoning, model-based reasoning, probabilistic reasoning, causal reasoning, qualitative reasoning, spatial reasoning and temporal reasoning .
Knowledge Engineering 
Knowledge acquisition, knowledge-based systems, knowledge compilation, Shells and Tools, Methodologies, Modeling, Knowledge Discovery, Knowledge Representation techniques , Knowledge Management, Ontological engineering 
Document Engineering
e-Health,Web services , Documents analyzing techniques, Documents designing approaches ,Encoding documents models,Internet information exchange ,
Relevant Applications 
Medical informatics,  Health Informatics, Bioinformatics, Brain Informatics, Proteomics, Gennomics

Special Session on Recent Trends in Automatic Detection of Welding Defects in Digital Radiography

4.   International Symposium on Recent Trends in Automatic Detection of Welding Defects in Digital Radiography

Chairman-Organizer: Prof. M. Radhika Mani, Department of CSE, Pragati Engineering College, India  

The Symposium will bring together experts, academics and practitioners from a wide range of disciplines to discuss options and strategies for recent trends in automatic detection of welding defects in digital radiography. The aim is to link scientific research and practical implementation and to consider and compare various strategies for weld defect detection. The conference session will be multidisciplinary with a focus on digital image processing methods for non destructive testing and classification methods for recognition of weld defect. 
The conference session will be organized along two tracks in parallel. 
Track 1: The Digital Radiography Non Destructive Testing
Track 2: The Classification and Recognition Methods for Weld Defects

5.   International Symposium on Application of advanced control techniques in renewable energy systems

Chairman-Organizer: Prof. AbdelGhani AISSAOUI, University of Bechar,, Electrical Department, Faculty of Technology,University of Bechar, BP 417, Route Kenadsa-Béchar, Béchar, 08000, Algeria,
Co-Organizer: Prof. Ahmed TAHOUR, University of Mascara,, Technology Department, 
University of Mascara, Mascara, 29000, Algeria

 Several sources of renewable energy are subject of advanced research, which the aim is to develop techniques for extracting power with high reliability, lower cost and increased energy efficiency. The goal of this session is to 
present new techniques of control applied in renewable energy systems (wind, solar), to maximise the energy production in such systems, to have an optimal functioning of these systems and to increase their economic attractiveness. Renewable energies as: solar, wind, … are clean and constitute an alternative to meet the needs of today's society. These energies neglected in the past, find their proper place, obtained through research and studies that are increasingly diverse and multidisciplinary. In this session we focus on the conversion of renewable energies: wind and solar into electrical energy. These energy sources become competitive to other energy sources. They are object of advanced researches, which aim 
to develop new techniques of control for extracting power with high reliability, lower cost and increased energy efficiency. In this context, the present session focuses on wind energy using electrical machines (Induction generator, synchronous generators, …) and solar energy using Photovoltaic generators. The use of these energies is with big benefits in the case when they are connected to the electrical networks and in the case when they are used in isolated areas. The evolution of technology in this field is going so fast. The aim of this session is to share the last researches on techniques of control used for optimal functioning of the energy conversion systems; and to present new technologies used in the field of production of electricity from wind and solar energy sources.
- New techniques of control applied to Wind turbine
- New techniques of control applied to photovoltaic system

6. International Symposium on Face Identity Management with Different Face Modalities
Chairman-organizer:  Dr. Dakshina Ranjan Kisku
Department of Computer Science and Engineering, National Institute of Technology Durgapur, M. G. Avenue, Durgapur – 713209, Burdwan, West Bengal, India,

Aim: Face recognition is one of most challenging research areas in machine vision and pattern classification. The variability in the appearance of face images, either due to intrinsic and extrinsic factors, makes the identification problem ill-posed. To understand the key areas of different face recognition modalities including 2D and 3D visible face, unconstrained face and heterogeneous face recognitions, face anti-spoofing, etc., this mini-symposium will provide a platform for researchers, academicians and industry people to discuss the problems and exchange ideas for the existing problems.


•2D and 3D face recognition
•Heterogeneous face recognition
•Face anti-spoofing systems
•Feature extraction and encoding techniques
•Fusion in face recognition
•Face recognition in cloud
•Face template protection
•Face avatar recognition
•Evaluation protocols and biometrics standards for face recognition
•Soft biometrics attributes in face recognition
•Security and reliability assessment
•Facial expression recognition
•Affective computing using face

7. International Symposium on Framework for Modeling and Reconstruction of High-dimensional Data

Chairman-organizer:  Dr. Amit K. Maitra, Chairman & CEO, Foundation for Emerging Solutions, 2527 Hunter Mill RoadOakton, VA 22124, USA,

Aim: Interest in information and data management(I&DM)is growing dramatically as organizations recognize that they operate in a business environment where information and data(I&D)is their most valuable asset. There is aneed to collect, analyze, standardize,harmonize and reconstruct high-dimensional data to improve security, organizational processes,and administrative efficiencies.The challengeis to exploit high-dimensional data management rapidly toadd value and security. This symposium providesa framework for utilization of enterprise information and shares examples of how thisadds value

Strategic Information and Data Management (I&DM)PrinciplesCore Concepts of I&DM
Abundance of Information & Data 
Transformation & Continuous Improvement of I&DM 
Handling a high number of inquiries from different communications channels
Creating Value fromKnowledge Centric Operations (KCS)and Examples of Success Stories
Leveraging KCS and Communitiesat Extreme Networks
Interacting online with many partners while managing critical dependencies on business partners
Service Innovation
Knowledge Integration
Strategy for a Global Support Experience and Examples of Successful Use
Buy-In atAll Levels
Assessing Value

8. International Symposium on Hybrid Intelligent Techniques for Information and Image Retrieval

Chairman-organizer: Dr. Siddhivinayak Kulkarni (Sid), 
Associate Professor, Department of Computer Engineering, Maharashtra Institute of Technology-College of Engineering, Paud Road, Pune 411038 Maharashtra, India
e-mail:, Honorary Research Fellow at School of Engineering and Information Technology, Federation University, Australia. e-mail:

Computational Intelligence researchers are always fascinated by the use of intelligent techniques in solving the real world problems. Many intelligent techniques have been successfully demonstrated the capability of dealing with information/image retrieval problems. The purpose of this symposium is to address the latest developments of computational and hybrid intelligent algorithms for numerous applications in information/image retrieval. This symposium aims to bring together computational intelligence researchers to demonstrate latest progress, emphasize new research questions and collaborate for future research direction. 

This symposium will seek original and unpublished research work on all aspects of hybrid intelligent techniques for information/image retrieval but not limited to: 

Neural learning algorithms, machine learning algorithms, support vector machines, statistical learning, fuzzy logic, evolutionary computing and reinforcement learning. Applications in information retrieval, text mining, text recognition, content based image retrieval, image processing, image segmentation, video tracking/analysis, medical imaging, speech recognition

9. International Symposium on Modelling, Simulation and Optimization in Engineering

Chairman-organizer: Dr. Amer Farhan Rafique, Associate Professor, King Abdulaziz University, Jeddah, Kingdom of Saudi Arabia; 

Aim: In recent years, use of Modelling, Simulation and Optimization techniques in engineering has accelerated with the advances in computational methods and resources. Modelling, Simulation and Optimization has become an important part of the research repertoire, supplementing and in some cases replacing lengthy experimentation procedures. Purpose of this symposium is to bring together users, developers, and researchers in engineering industry to present the latest theoretical and computational evelopments, applications, ideas, and problems related to Modelling, Simulation, and Optimization. Papers may present innovative models,  methods or the problem of solving engineering problems.

Topics: Engineering parameters are difficult to predict and analyze before prototyping but modern modelling, simulation and optimization packages can replicate the actual phenomena in less time and cost. Modelling and simulation focuses on optimizing and predicting the performance and reducing the costs of complex systems that may involve multiple interacting disciplines, such as those found in automobiles, aircrafts, spacecrafts, industrial and manufacturing equipment, and engineering operations. The multidisciplinary nature of this session invites papers on Modelling, Simulation and Optimization models, methods and approaches with applications in the various disciplines of engineering including but not limited to Mechanical Engineering,manufacturing Engineering, Industrial Engineering, Engineering Operations, Aerospace Engineering, Electronics Engineering, Electrical Engineering, Bio-Medical Engineering, Computer Science and Engineering, and Renewable energy.